Equal Gender Education

Different people have different ideas and opinions as to whether it is more important to educate boys or girls. Some believe that the education of boys is more important than that of the girls, and meanwhile others disagree. In reality, the choice depends on what country, culture, or society we are talking about. In many nations including many Asian countries, tradition demands that men provide the family with income, food, clothing, etc. and women perform the usual household business such as cooking, cleaning, washing, and taking care of children. In such ocieties it seems logical that there is more stress on the priority of men's education rather than women, since it is the male that requires the needed education to succeed, survive, and thrive. It is perceived in these countries that education is not of vital importance to women since they â€Å"are not† supposed to work outside the house, and that their primary duty is to take However in modern societies and nations, the situation differs. Now days more countries are inclined towards modernization. The general moral philosophy of these nations is equality amongst men nd women; therefore, this means equal business, industrial, and occupational opportunities for both the men and women. Based on these facts, it is vital to put of equal stress on the education of men and women for this will insure that females and males perform their tasks professionally and adequately. In my opinion, the edification of men and women has to be equally emphasized because today's technological and economical advanced world require fully educated, experienced, and versatile citizens regardless of their gender. And this can be only achieved through sufficient education of both men and women.

Modern Day Discrimination Essay

Gender inequality is the most important issue society faces today. This is the unfair difference in the way people are treated based on their gender. There are many places where this injustice occurs. The most detrimental is where people spend a large portion of their time, which is the workplace. The workplace must not be viewed as only a traditional job, but also things such as being a wife or a mother. Society must improve gender equality in the workplace in order for all people to feel likely to succeed. Military wives are viewed as supporters, rather than equals who can also be successful. A group of authors elaborate on the issue, â€Å"the military wife has traditionally had an important and recognized role in military life, providing the necessary support and care that contributed towards the success of her husband’s career† (Rosen, Knudson and Fancher 327). All people, male or female, need not only to be treated the same, but viewed the same if society is going to grow. Women are put in a group that does not allow them to have a rewarding life without a husband. This teaches young women that they need a man in their life to be successful. Which could lead to poor decisions or premature and failed marriages. Women who do attempt to be successful on their own are not given the credit they deserve for building a life on their own. This is proven in volume 16 of Gender, Work and Organization, â€Å"Women are typically viewed as ‘honorary men’ or ‘flawed women’ for attempting to participate in fields traditionally dominated by men† (Powell, Bagilhole and Dainty 412). Women who strive to have success in male dictated professions are not seen as strong people but rather weak women or women who act like men. These women are stronger than most for stepping outside the normal range of female jobs. If women find themselves resembling men more than usual to be successful, it will take away from the diversity of society. This can be corrected by accepting that anybody can perform his or her job just as well as anyone else . Women are not given equal opportunities to obtain employment positions for sexist reasons. Maryn Oyoung shares her thoughts one the issue of discriminatory hiring, â€Å"Men and women should be allowed to compete freely and on an equal basis in the workplace; however, current laws do not promote this idea because they do not take into account the reality that women uniquely experience the physical side effects of pregnancy† (518). Due to the simple fact that men  are physically incapable of going through the process of pregnancy, they have an advantage in the workplace as long as laws continue not to address the issue. This allows employers to discriminate against women because of the possibility of pregnancy. If women are forced to choose between a job and a family, they likely will choose family. Creating a less diverse group, which offers fewer opinions on important decisions. Most women who are able to have children are of crucial importance to the human race. Promoting the success of these women would encourage them to have children making our race more diver se and accepting. Along with the lack of equal opportunities, gender inequality in the workplace is shown through unequal pay based on gender. Browne explains the pay ratio between men and women for the same positions. â€Å"In 2010 the female-to-male annual earnings ratio in the United States was 0.77, and in 2011 the weekly earnings ratio was 0.82† (786). Men are unrightfully being paid more for their contributions to a business than women. Even if those contributions are identical to those of women. This can discourage women from following their dreams because they will not be rewarded as much for their hard work. If businesses were to pay men and women equally, it would create a more diverse workplace, which is better for the people who work in them because it forces them to understand the issues of others. While men who express strength and leadership are looked upon as role models, women who display these traits are seen as rude or uncaring. â€Å"Professional women who are judged to be competent are frequently judged to lack warmth† (Gutek 338). Strong women are treated badly because of the way they do their job; this encourages women not to be as tough. This double standard results in female leaders being too easy on their employees. This can cause them possibly to lose their job or lead an unsuccessful business. If people were judged solely on their performance, more strong female leaders would emerge. Women are raised in such a way that they do not see their own potential, which contributes to the ongoing inequality. â€Å"Over ninety percent of receptionists (92.5%), dieticians and nutritionists (92.6%), registered nurses (90.5%), and preschool and kindergarten teachers (97%) are female† (Browne 789). Women are taught from a young age that they have jobs they will perform and men have jobs they will do. The media and current generations constantly preach this idea. Creating an endless cycle of inequality. The most effective way to combat this would be to alter the  way people approach teaching their children abo ut the workplace. If this were to be accomplished, society would be a place where any person could do or be anything they desire without worrying about what others think because those others would feel the same way. Young women are raised only to please men rather than build prosperous lives of their own. In â€Å"Girl,† Jamaica Kincaid offers a dialogue between a mother and her daughter. â€Å"This is how to behave in the presence of men who don’t know you very well† (385). Some women are raised only to please men, while men such as myself are never taught the importance of pleasing women at a young age. Rather, young men are taught how to be successful in the workplace. Since men are raised this way, they are instantly put at an advantage in their careers. If young boys and girls were raised in a more similar way, it would increase the equality in the workplace. This would allow all people to have the same opportunities, no matter their gender. Women are forced into jobs that turn them into objects rather than individuals. In â€Å"Two Ways A Woman Can Get Hurt,† Jean Kilbourne provides multiple examples of women be dehumanized through advertisement. â€Å"Men conq uer and women ensnare, always with the essential aid of a product† (420). The jobs of the women in provocative advertisements is only to excite men into looking at their advertisement. A consequence of this is that these men will hopefully notice what the advertisement was about and remember it because of the objectified women in the ad. In many cases, this is the only job available to these women because of the way they were raised. If more women were raised in a way that forced them to understand that they are just as valuable, if not more valuable as any man, they would expect that they will be allowed equal opportunities and would accept nothing less. This would force the advertisement community to take a different approach, which would cut back on the objectification of women. Gender is also the key difference when determining job success. â€Å"Research clearly indicates that women are disproportionately overrepresented in the lowest paying occupations and that the female sex composition of occupations is negatively related to median earnings† (Jaffee 377). Women are not allowed into higher paying jobs as often as men are. Thus causing women to earn less on a yearly basis, which leads to a more stressful lifestyle. Equal job opportunities is the key to workplace equality. If a man had a female boss, he may realize that women are just as  capable as men are. Then down the road, he may be in a position of power where he would then understand that he could feel confident hiring a woman. This workplace inequality affects women not only while they work, but also as they grow old. â€Å"For most women, attitudinal and structural factors in the workplace put them at a tremendous disadvantage and render them more vulnerable than men to hardship as they age† (Barnett 25). All the factors that contribute to gender inequality in the workplace cause a severe issue for women. As they grow old, they likely will earn less pension or retirement opportunities because of the sexism displayed in modern business. This again causes women to rely on men to support them. Making it very hard for strong women to thriv e as they enter their older age. This does not only affect women though. It is a fact that on average, women live longer than men do. If men are allowed to rely on the success of women, they could feel more confident as they age as well. People who rely on statistics can argue that gender discrimination in the workplace is not a choice, but rather a natural consequence that comes with the differences in the human body. â€Å"On average, women are five inches shorter, have 55 to 60 percent less upper body strength, a higher fat-to-muscle ratio, lower bone density, and 20 percent less aerobic capacity† (Summers 74). Men defending their decisions would argue that women are not allowed different opportunities because of the physical differences between women and men. This includes certain combat situations or construction where physical strength is vital. This is not reliable because of the countless jobs that are not influenced by physical strength. Women and men are being too generalized and not examined for specific strengths. Speaking on The Department of Defense Combat Exclusion Policy, Chris and Jeannette Haynie state, â€Å"The policy institutionalizes the concept that all male Marines, based on gender alone, are capable of performing duties in the combat arms, while all female Marines similarly are not† (46). Assumptions are being made of men and women. The policy implies that all men are more capable in combat than any women are. This is an issue because it discourages women from contributing their skills and holds men to a high standard of having to be better than any women. Workplace gender inequality is the most important issue society faces. The unfair treatment leaves women forced to rely on others. This may cause women to question their choices, which leaves them at a disadvantage. If not all people are  given the same opportunities, then the progress society has made will be for nothing. When it comes to gender inequality, it is all or nothing. There is no in-between where people are almost equal. Works Cited Barnett, Rosalind Chait. â€Å"Ageism And Sexism In The Workplace.† Generations 29.3 (2005): 25- 30. Academic Search Complete. Web. 23 Nov. 2014. Brown, Kingsley R. â€Å"Biological Sex Differences In The Workplace: Reports Of The â€Å"End Of Men† Are Greatly Exaggerated (As Are Claims Of Women’s Continued Inequality).† Boston University Law Review 93.3 (2013): 769-794. Academic Search Complete. Web. 23 Nov. 2014. Gutek, Barbara A. â€Å"How Women Continue To Be Disadvantaged In The Workplace.† Analyses Of Social Issues & Public Policy 10.1 (2010): 337-339. Academic Search Complete. Web. 23 Nov. 2014. Haynie, Chris, and Jeannette Haynie. â€Å"Marines Or MARINES*?.† U.S. Naval Institute Proceedings 138.11 (2012): 46-51. Academic Search Complete. Web. 19 Nov. 2014. Jaffee, David. â€Å"Gender Inequality In Workplace Autonomy And Authority.† Social Science Quarterly (University Of Texas Press) 70.2 (1989): 375-390. Academic Search Complete. Web. 24 Nov. 2014. Kilbourne, Jean. â€Å"Two Ways A Woman Can Get Hurt.† Rereading America: Cultural Contexts for Critical Thinking and Writing. Ed. Gary Colombo, Robert Cullen, and Bonnie Lisle. 9th Edition. New York: Bedford/St. Martins. 2013. Print. Kincaid, Jamaica. â€Å"Girl.† Rereading America: Cultural Contexts for Critical Thinking and Writing. Ed. Gary Colombo, Robert Cullen, and Bonnie Lisle. 9th Edition. New York: Bedford/St. Martins. 2013. Print. Powell, Abigail, Barbara Bagilhole, and Andrew Dainty. â€Å"How Women Engineers Do And Undo Gender: Consequences For Gender Equality.† Gender, Work & Organization 16.4 (2009): 411-428. Academic Search Complete. Web. 23 Nov. 2014. Rosen, Leora N., Kathryn H. Knudson, and Peggy Fancher. â€Å"Cohesion And The Culture Of Hypermasculinity In U.S. Army Units.† Armed Forces & Society (0095327X) 29.3 (2003): 325-351. Academic Search Complete. Web. 23 Nov. 2014. Summers, Clark H. â€Å"Women.† Military Review 93.4 (2013): 71-78. Academic Search Complete. Web. 23 Nov. 2014. Oyoung, Maryn. â€Å"Until Men Bear Children, Women Must Not Bear The Costs Of Reproductive Capacity: Accommodating Pregnancy In The Workplace To Achieve Equal Employment Opportunities.† Mcgeorge Law Review 44.2 (2013): 515-542. Academic Search Complete. Web. 22 Nov. 2014.

Review Idealism and Realism in International Relations.

Question: – Review idealism and realism in international relations. Introduction When studying international relations as an academic discipline studying about Idealism and realism is a major concern. These two approaches are used widely when it comes to decision making procedures. In idealism the decisions are made using ideas. Institutions such as League of Nations, United Nations as well as Local organizations like Organization of African Unity are developed according to the idealist tradition. This was introduced as a educational thought in 400 BC by Plato.He thought that the humans could be improved from within by correcting their thoughts and discovering knowledge already lies within since birth. The more perfect our ideas are the better we can serve the world. In realism world politics are driven my competitive self- interest. This further details that all states operate under as the greatest factor in causing nations to diverge from morally guided behaviour. Until Worl d War II the actual theory of realism did not came about. Realism theory has been introduced from historical writers such as Machiavelli, Hobbes, Thucydides and Sun Tzu.But Hans J. Morgenthau and E. H. Carr are considered most instrumental in establishing the tenets of classical realism theory in modern age. This theory differs from all considerations of legality and moral guidance from state policy that holds that all states are capable of violating laws if there is any necessity to advance their interests and power. These two different theories created a significant change in International Relations all over the world. Most political, economical decisions are taken by using Idealism and realism as reference to analyze and understand the facts.Idealism Idealism is a term applied to any idea, goal or practice considered to be impractical. As examples entrusting international security to the UN, creating an African union on the model of European Union, global eradication of poverty a nd injustice, etc. can be pointed out. Idealists usually rest on a pessimistic perspective towards human nature along with an historical judgment to achieve a change in world affairs. Idealists emphasize the power of reason. They strongly believe in the effectiveness of ideas. Through this they see the possibility of establishing a political system rimarily on morality. This will lead the humans to remove their selfish ideas and helps to build a nation that forms peace, prosperity, cooperation and justice. When a person looks at war in an idealist view, it can no longer be considered by anyone as a suitable way to achieve goals. It is because it affects both parties severely. Former President of the United States of America Woodrow Wilson is considered to be one of the key founders of Idealism. He presented the â€Å"Fourteen points† proposal that was contained on his speech to a joint session of congress on 1918.The address was intended to assure the world that the Great War (World War I) was being fought for a moral cause and for postwar peace in Europe. One of the most well known outcomes of Idealism is the democratic Peace Theory. This states that similar modes of democratic governments do not clash each other. As an impact of Idealism on International Relations Organizations like League of Nations. This was resulted in the covenant of the League of Nations with 42 original members. But this was ineffective because it had no power to enforce its decisions and issues in security.Due to these reasons the league was dismantled in the year 1940 but it had served as a model for the United Nations. Following the failure of League of Nations and the outbreak of the Second World War, descendent theories like Liberalism and Neo-conservatism were created. Through Liberalism organizations like United Nations, NATO, International regimes like Bretton Woods System were built. Neo-conservatism was drawn from Liberalism and focused more on universal values such as Human rights, democracy, free trade, minority protections etc. nlike other theories Neo-conservatism is willing to use force if necessary to push for its goals. Realism This is a theory that world politics is driven by competitive self- interest. It implies that realists see that humankind is self-centered and competitive. Also they believe that the principal actors in the international system are sovereign states. The basic assumption of Realism is that man is wicked, aggressive and bad and also state struggles for power. This implies that realism possesses a pessimistic, negative and a suspicious behavior.This was originated after the Second World War. But its primary assumptions were noted in its earlier writings. People like Thucydides, Sun Tzu, and Otto Van Bismarck can be pointed out as examples. It began as a wide field of research after the war. People like Hans J. Morgenthau, Carl von Clausewitz are considered as the modern thinkers of the classical realism. This theory ha s been associated with thinkers like Niccolo Machiavelli and Thomas Hobbes. Hans J Morgenthau described about six principles of Political Realism. 1.Political realism believes that politics, like society in general, is governed by objective laws that have their roots in human nature. 2. The main signpost of political realism is the concept of interest defined in terms of power, which infuses rational order into the subject matter of politics, and thus makes the theoretical understanding of politics possible. Political realism avoids concerns with the motives and ideology of statesmen. Political realism avoids reinterpreting reality to fit the policy. A good foreign policy minimizes risks and maximizes benefits. 3.Realism recognizes that the determining kind of interest varies depending on the political and cultural context in which foreign policy is made. It does not give â€Å"interest defined as power† a meaning that is fixed once and for all. 4. Political realism is aware of the moral significance of political action. It is also aware of the tension between the moral command and the requirements of successful political action. Realism maintains that universal moral principles must be filtered through the concrete circumstances of time and place, because they cannot be applied to the actions of states in their abstract universal formulation. . Political realism refuses to identify the moral aspirations of a particular nation with the moral laws that govern the universe. 6. The political realist maintains the autonomy of the political sphere; he asks â€Å"How does this policy affect the power and interests of the nation? † Political realism is based on a pluralistic conception of human nature. The political realist must show where the nation's interests differ from the moralistic and legalistic viewpoints.

Prevention and Eradication of Ebola in Nigeria Coursework

Prevention and Eradication of Ebola in Nigeria - Coursework Example Ebola virus refers to the genus Ebolavirus that include five different virus species named for the region where they were primarily detected. They are Zaire ebolavirus, Bundibugyo ebolavirus, Reston ebolavirus, Sydan ebolavirus and TaÃ'â€" Forest ebolavirus. All of the species of the Ebolavirus genus contain one member virus. Among these viruses four provoke Ebola virus disease (EVD) in humans and Reston ebolavirus causes EVD in other primates. (Jens H. Kuhn, 2010) Ebola virus disease, also called Ebola hemorrhagic fever and defined as an acute usually fatal disease in humans. EVD characterized with the damage of the immune system and organs. Ebola virus has a quite high rate of the replication. After entering the human body through the contact with skin breaks or mucous membranes it rapidly replicates in different types of cells of the immune system such as monocytes, macrophages and dendritic cells and other types of cells such as fibroblasts, adrenal gland cells and liver cells. T he immune cells transport the virus to the lymph nodes where further replication occurs and viral parts enter the blood stream. (Duane J. Funk, 2015) Hence, the virus major target is immune system cells especially macrophages. Virus reproduction in the immune cells triggers their programmed cell death that leads to the weakened immune system response. After three days of the virus exposure it affects endothelial cells that form endothelium a thin layer of the interior surface of the lymphatic vessels and blood vessels.

Hell-Heaven Essay Example | Topics and Well Written Essays - 1000 words

Hell-Heaven - Essay Example Aparna was â€Å"even in her bleakest hours of homesickness she was grateful that my father had at least spared her a life in the stern house of her in-laws, where she would have had to keep her head covered with the end of her sari at all times and use an outhouse that was nothing but a raised platform with a hole† (DiYanni 350). Aparna’s husband and she were thrown together by chance. This part of her life was one of her metaphorical Hells. a release for Aparna. Since the outings were supervised by the narrator, Aparna’s husband felt â€Å"freed from the sense of responsibility he must have felt for forcing her to leave India† (DiYanni 351). Although the narrator did not realize it at the time, she later came to the realization that â€Å"It is clear to me now that my mother was in love with him† (DiYanni 351). Aparna had more in common with Pranab Kaku than with her husband. For example, â€Å"They had in common all the things she and my father did not: a love of music, film, leftist politics, poetry† (DiYanni 350). This relationship was Aparna’s Heaven. Another Hell for Aparna was the foreign atmosphere of America. Even in America Aparna wore Indian clothes. The narrator wrote, â€Å"given that my mother was wearing the red and white bangles unique to Bengali married women, and a common Tangail sari† (DiYanni 348). Aparna clung to her old Indian ways. She constantly chided Usha about the Bengali ways. Aparna admonished, â€Å"Don’t think you’ll get away with marrying an American, the way Pranab Kaku did† (DiYanni 356). The balancing act of raising an Indian daughter in America was Hell for Aparna. Bangladesh was Heaven for Aparna. That is why Aparna fell in love with Pranab Kaku, not for who he was, but what he represented. Pranab Kaku reminded Aparna of â€Å"cheerful songs of courtship, which transformed the quiet life in our apartment and transported my mother back to

Analysis strokes Essay Example | Topics and Well Written Essays - 1500 words

Analysis strokes - Essay Example In the breaststroke style, a swimmer swims on his chestandtorso. The swimmers headremains out of waterwhileheswims. Before 1950, there wererules in theswimmingcompetitionwere one race under thewater in the breaststroke (Hannula,2003). Theunderwaterracingproved to be dangerous as swimmers suffocatedwhile under thewater. To date, thesetechniqueshavebeenimproved as peoplechangetherules, swimmers nowrace on thewatersurface. Swimmers are allowed to stay under thewater during one strokecyclewhenstartingand after eachturn. Breaststrokers createlargeforces during the propulsive phases of eachstrokecycle. In the breaststroke, there are three phases during themotion of thebody. The out-sweep, the in sweepandtherecoveryphases. Out- sweepandthe in sweep are both propulsive movement with in-sweep beingthemorepowerful of the two. The out-sweep begins after a swimmer extend their legsfully. Armssweep outwards as shoulders medially rotateand adduct. Theyhave to remainstraight until thepressure of thewatercausesthearm to flex. Thebodylies horizontally as itforms a Y shape. One pitches their palms outandbackandhandstossed outwards at near 90 degrees as well as backwardangle of up to40 degreesfortheforwardmovement. Upperarms should be parallel to thewatersurface, andshoulders medially rotated to allowpulldirectlystraightback (Maglischo, 2003). In the in sweepphase, handscontinue to circle to facedownwardandinward, becominginwardandupward. One has to reachapproximately 100degrees of theelbow flexion, with maximummedialturning of theshoulder to permitgreatestsurfacearea to pushback on thewater.Elbows should remainparallel to thewatersurface. Handspass under theelbows, as theelbows flex maximally. Asthehandsbegin to moveupward, thehipsdrop, initiatinghipandknee flexion (Ferrauti, A., Pluim, B. M., & Weber, K. 2001). In therecoveryphase, handscometogether with palms

History Discussion Research Paper Example | Topics and Well Written Essays - 250 words - 5

History Discussion - Research Paper Example Rule by a central government is seen to be effective as it will give the nation great power in making crucial decision such as going to war or how government finances should be distributed. This is seen due to the fact that there are less bureaucratic processes in dealing with when dealing with a centralized government than when dealing with a devolved government. Ratification of this constitution across all states is seen to be important as this will greatly increase the geographical size of the nation and also encourage the joining of new states. Having a large nation in terms of geographical size is seen to be important as these increases the quantity resources available in the country (Maier.1998). This will also increase the variety of resources which are available in the country as a resource not found in a particular state can be found in another. The availability of a wide range of resources is bound to affect the economic growth of the nation positively in that this will enable the production of a wide range of goods. This will lead to the steady rise in the economy of the country with the nation likely to be able to produce all goods needed by its citizens. Moreover, the ability to produce excess goods will be important as this will encourage trade with other countries thus resulting in further economic growth within the nation. The ratification of this constitution will thus spur fast economic growth across the country. Ratification of the constitution will also be helpful in ensuring the equal growth of all areas across the nation will give the central government an opportunity to be able to help out the states which cannot grow fast enough due to lack of resources. The ratification of this constitution is thus bound to increase national loyalty and change the way Americans think of each other. This will encourage citizens to view each other as brothers’ thus encouraging people to look for opportunities beyond

Exercise for windows excel Essay Example | Topics and Well Written Essays - 750 words

Exercise for windows excel - Essay Example Next, the planning phase must include the sources of funding the project and how these will be distributed. The third phase is the execution step i.e. putting in practice what was planned. Moreover, a project management must have a closing stage, which is a review of the success of the project, possible restraints and also possible changes to be implemented. During the implementation of the project, communication plays a crucial role because thoughts should be conveyed in a timely, accurate, and relevant manner. Two types of communication are possible i.e. synchronous if those communicating are communicating at the same time and asynchronous if those communicating are not able to communicate at the same time the communication is called. Another aspect related to project management is emotional intelligence, which is connected to the leaders ability to: have an awareness i.e. an understanding of the different emotions that may be present during project activities, must have an ability to appraise the degree of the emotion, and must have the ability to direct the course of the emotion i.e. in some way to have a degree of control related to the emotion. The quality of emotional intelligence that the project leader should have will help in the communication process by influencing the trust the team members will have in the leader and in this way, the success of the project. Although the manager of the project has all these skills, conflicts may still arise so conflict resolution skills should characterize the leader. Related to the success of this process, time and cost management are two important issues. A first rule that applies is to prioritize the things that need to be done, followed by time spent for developing personal relationships. Also, it is important to make sure that the person responsible plans to complete the activity, and attempts to be organized. Finally, an essential rule is to have the ability of becoming adaptable to

To what extent is the novel of adultery a critique of society Essay

To what extent is the novel of adultery a critique of society - Essay Example In order for there to be a ‘novel of adultery’, adultery itself must exist. In other words, the society in which the narrative is played out must regard sexual infidelity to a life-partner as a crime or sin. The very word ‘adultery’ is pejorative, deeply condemnatory, and would have been even more so to Russian readers in the late nineteenth century. Unlike French society, which compensated those in arranged marriages by tolerating the keeping of mistresses, the Russian aristocracy demanded that any sexual activity outside marriage must be strictly discreet – and if the offender was a woman, the stakes were very high indeed. An errant husband might conceivably enhance his reputation through dalliances with the right ladies, but if a woman’s indiscretions were made public, she was liable to lose everything. Adultery therefore cannot exist outside its social setting. It owes its very existence to society. Consequently, any novel with adultery as its main theme must inevitably examine the social framework in which this adultery takes place. To this extent then, the ‘novel of adultery’ is certainly a novel about society’s values, rules, taboos and punishments. Those values, however, are not always set in stone, and are certainly not always fair. As Christo N Koutroulis1 points out in an essay examining the meaning of the novel’s epigraph, ‘while Oblonsky and Princess Tverskaya were having extramarital affairs, Princess Tverskaya had no problems with judging and shunning Anna.’ Adultery, the author seems to suggest, is a dangerous game with complex rules and endless possibilities for personal ruin, but it is possible for certain individuals to play it to their own advantage. As we see, Anna is not one of those fortunate few. Although society’s values are extremely important in Anna Karenina, the novel is far more intricate than the simple record of a woman who broke the rules and

A Lesson Before Dying Essay Example for Free

A Lesson Before Dying Essay â€Å"A Lesson Before Dying† takes place in a small Louisiana Cajun community in the late 1940’s. In the novel, Jefferson, a young black man, is an unwitting party to a liquor store shoot out in which three men are killed; being the only survivor, he is convicted of a murder and sentenced to death. To portray this novel Gaines displays respectable literary devices like setting, tone, and characterization; therefore helping I as the reader feel the emotions of Jefferson from his point of view. In the initial setting of the novel, Jefferson sits in a courtroom located in rural Louisiana, which is filled with anger, tension, isolation, and quietness from the people in the room. This setting of the book supports Jefferson’s personality in chapter nine when Jefferson’s character is introduced. Jefferson’s cell could be considered the second setting or Jefferson’s setting in the book. Jefferson’s relationship to the courtroom (initial setting) supports Jefferson’s personality in the prison. He is isolated just like in the courtroom. â€Å"There was an empty cell between Jefferson and the rest of the prisoners† (Gaines 71). Jefferson’s cell was not only isolated like a courtroom in rural Louisiana, but quiet. â€Å"Jefferson’s been quiet . . . He didn’t answer† (Gaines 71). Due to Jefferson’s isolation and quietness, he has built anger inside. An anger which had been building up since the courtroom conviction. â€Å"Nothing don’t matter,† he said looking up at the ceiling. The first setting of the novel is similar to Jefferson’s cell setting. The three settings: The courtrooms, location and time era of the town, and prison all have similarities to Jefferson’s character traits. The court trial scene embodies everything that is contained within the novel. All events that occur throughout the entire novel are a repercussion of Jeffersons court case. These circumstances set up the tone that is simply perceived throughout the novel. Gaines tone in the novel shifts as the novel progresses. Gaines made the novel begin with a pessimism view; everything seemed awful and negative especially the court trial. Gaines shows us this disgust tone by telling us the details of the jury members. The twelve â€Å"white† jury members of the case shows us that Jefferson felt dominated by the whites. As the novel goes on Gaines tone shifts and Jefferson seems more aware and confident, the anger and disgust diminishes the longer Jefferson sits in jail. The twelve white jury members were also Gaines way of showing the dominance, and power of the whites during this ime, only thinking that blacks are only good for working, and is incapable of thinking for themselves Do you see a modicum of intelligence? A trait inherited from his ancestors in the deepest jungle of blackest Africa What you see here is a thing that acts on command. â€Å"(Gaines7). Understanding this time era is important for the tone, and Gaines gives good examples representing the era to the tone. Gainess style is unique because the figurative language that he uses improves the readers mental picture. For example, when Gaines was describing Miss Emma at the beginning of the novel he says she became as immobile as a great stone or as one of our oak cypress stumps(Gaines 36). This allowed me as the reader to picture Miss Emma and the condition that she is in with a mental image throughout the entire novel. He also used figurative language while he describes in chapter fourteen the Louisiana Countryside. Gaines told in great detail the cemetery appearance as Grant walked through and then explain the smells and feelings he has while Grant explores the Sugar Cane Planation with Vivian. The literary devices were greatly put to use by Gaines to explain, and portray his novel to any reader. He has made a novel enjoyable for an audience that may not like reading due to his sarcasm (tone), and figurative language to set up numerous scenes. The settings are a main building block for this novel because the court room and the jail cell is when the story line is put together. Each trial, and everyday described by Gaines about Jefferson in jail puts the novel together into one amazing novel that I will be sure to recommend.

Perceptions And Attitudes Towards Solar Energy Environmental Sciences Essay

Perceptions And Attitudes Towards Solar Energy Environmental Sciences Essay The scope of this research is on the energy consumption patterns in India and what proportions of the energy needs are met. We will consider the size of the market for the solar power generation as most parts of India focus on the conventional energy rather than the renewable energy. A brief about the power sectors in India is also discussed; the data for this research is collected by interpreting the secondary data and by conducting interviews as in the primary data. A literature review on environmental marketing is made by taking up the existing technology this will help us in making a market plan for the solar power sector that is viable. Power sector in India-A Brief: The power industry is growing rapidly in India as it consumes 3.4% of the global energy. There is an increase in the annual demand by 3.6% over the last 30years. The surging demand is from the industrial and domestic sectors. Domestic sector à ¢Ã‹â€ Ã¢â‚¬â„¢ 25.87% (2006-07) Industrial sector à ¢Ã‹â€ Ã¢â‚¬â„¢ 35.5% (2006-07) The private and the global firms made their entry ever since they were allowed to participate in the power sector, 1991. But the State Electricity Board (SEBs) is the main source for generation and supply of electricity. Coal remains the dominant source of electricity, though there are many sources of power in India like Gas, Hydroelectric, Wind, and Solar. The installed capacity for power generation in India is 1,49,391.91 MW, and less than 60% of households consume electricity, the Industries followed by Agriculture are the two main sectors that consume power which is why the per capita consumption is very low in India. (India Reports,2009) Solar Energy scope and utilization: Solar energy in the recent times has been proved to be one of the most efficient ways to generate electricity. Usage of Solar-powered equipment in large scale can be beneficial as the carbon dioxide emission would be reduced to a great extent thus leading to a Green environment. The Solar-powered equipment could be used in hotels, hospitals, household purposes and government buildings as these are easily mountable on top of the buildings and requires less space. (Hughes,2009). Source: Central Electricity Authority, Ministry of Power, Ministry of New and Renewable Energy and Frost Sullivan estimates As India receives 3000 hours of sunshine every year which is equivalent to over 5000 trillion kWh and has many solar resources. The daily average solar energy is 4-7 kWh per sq m in different parts of India depending on the location (kotwal,A,2008). India is useful for exploiting the solar power for generating electricity with the technology available as there are about 300 clear sunny days in most parts of the country and the three important ways in harnessing the solar power is with the use of: Photovoltaic Cells- which convert the sunlight into electricity when the light rays are incident on the cells. Active solar heating systems- A collector is kept on the roof which absorbs the sunlight and in return heats the water tank connected to the collector. Passive solar design- Is used to trap more heat during the winter whilst not over heating during summers. Since the solar power is available in abundance it helps in fulfilling the energy needs of humans and with the usage of the solar power, there might as well be a day where the buildings and households need not rely on the external grid for the power (Earthsummit,2002). There has been much advancement made regarding the solar power and with the introduction of nanotechnology which will improve the efficiencies and result in reduced infrastructure cost this can very soon be a very competitive source of energy in a tropical place like India, though there are other sources of energy solar power has its advantages like the there are no trade barriers for the suns energy and this type of equipment can be placed anywhere where there is sunlight and is also eco-friendly which will not hinder the other surrounding factors thus making solar power more affordable (Brito et al,2005), this type of tiny nanotechnology solar cell can be printed on a thin flexible light- retaining material which will reduce the cost of production compared to the silicon cells which requires a clean room for manufacturing with no dust and should be free from airborne microbes, moreover the nano materials are useful in capturing and transmitting the energy. (Carlstrom,2005). The use of plastic materials has brought a change in harnessing the suns rays as half of the suns energy lies in the infrared rays and the other half in the visible spectrum, the plastic materials with the nanotechnology has the tendency to capture the energy from the infrared rays which is five times more efficient than the existing solar cell technology (Lovgren,2005). We will look at the market and the players globally and in India which suits consumer needs. Aim: To undertake a study on public awareness, attitude and perceptions of Solar power as an alternative to sources of power and to suggest a marketing plan for a technology/company that would be viable in India. Objectives: To examine and evaluate power sector in India. Identify and evaluate the alternative power sources in India Study on solar energy sector. To examine and analyze public awareness and perception of solar energy and alternative energy sources Identify solar power generation technology in India and abroad. Identify the technology that consumer needs and would be most viable in India. To carry out a literature review on Environmental marketing. On basis of the complete study a market plan is made to popularize the solar power generation technology in India. Research Questions: What proportions of Indias energy needs are met by solar power? Size of market, players, types of equipment and their effectiveness/efficiency? How are they being marketed? Are domestic households being targeted? What is the level of awareness of domestic usage of solar power amongst Indians? Why has solar power not caught on in a big way in a tropical country like India? Forming a market strategy. Research Methodology: The methodology used in this research is both primary and secondary, as this research deals with the current issues and also the data which is existing in the databases related to the Solar energy. Secondary Data: The data from journals, articles gives us an idea of how things were earlier regarding the usage of solar power equipment and also the data bases like Proquest-ABI Global, EBSCO, and Science Direct helps us to find out about the advancements made in the history of solar power with the help of the available statistics. This type of data is readily available on the internet or in the libraries so the time required to collect is comparatively less and there is a scope to find data in large amounts. The information which is obtained from the secondary data can be re-phrased and cited in the research with proper references and a detailed analysis on various power sectors can be obtained. Primary Data: The data collected from the primary data can be both qualitative and quantitative, as it uses different forms of data collection techniques like: Questionnaires It focuses on the sections of the research which are to be covered and can cover a large number of peoples opinion about a particular area of interest, a wider geographic coverage is obtained. In this research we make a questionnaire to find out about the attitudes and perceptions of Indian consumers regarding the usage of solar powered equipment. We mainly concentrate on the households as these constitute a major part in knowing the demand. The questionnaires once completed could be sent across through an email to various household groups in different locations in India and as well receive the reply through an email or post. The questionnaire could be structured or unstructured with open and closed type questions in it which would help us yield information regarding the perceptions of the Indian consumers regarding the usage of solar power. With the help of resources like the survey monkey the questionnaires can be formed and sent across to people for their views about a particular aspect concerned with the research. Interviews It is a technique that is used to gain an understanding of the underlying reasons for peoples attitudes, preferences or behavior. Interviews can be undertaken on a personal one-to-one basis or in a group. This can be done by calling up people personally or by having a gathering where a conference call could be setup and finding out information on how they feel about the usage of the solar powered equipment and as well make them aware of the advantages they get with the usage of the equipments. We can mainly focus on to what extent people in India are aware of the viability of the solar power. Project plan: Gantt chart representation: S.No. Title. June July August Week2 Week3 Week 4 Week 1 Week 2 Week 3 Week 4 Week 1 Week 2 Week 3 1 Research proposal completion 2 Sector analysis in India 3 Study of Solar power sector in India and world 4 Preparation of questionnaires and interview planning. 5 Interviewing people and filing responses received and literature review on environmental marketing. 6 Mapping needs to technology: identification of technology/company. 7 Forming a marketing strategy. 8 Coalition of research work.

Finite Element Analysis And Analytical Method

Finite Element Analysis And Analytical Method Stone columns are widely used as a ground improvement technique especially in construction of shallow foundations. The main concern in the application of stone columns rely on how well it performs, which involves reducing the overall settlement of the stone column. This project mainly investigates the comparison and contrast between finite element analysis and analytical method in modelling stone columns, whereby settlements of the stone columns are checked whether it is consistent. Finite element analyses were carried out by axisymmetric modelling of the stone column using 15-noded triangular elements with the software package PLAXIS. A drained analysis was conducted using Mohr-Coulombs criterion for soft clay, stones and sand. Analytical data used to compare the settlement was found according to the design method published by Heinz J. Priebe (1995). Both methods were compared by varying parameters such as modulus of deformation of the column to sand ratio, area ratio, stress, diameter, and friction angle of stone column that signifies different soil conditions. It is challenging to find a site with acceptable ground conditions for construction of structures such as buildings, bridges, etc. Often the bearing capacity of the soil would not be sufficient to support the loads of the structures nor would it be in a workable condition for the employees to build the structure. The need for the use of such land with weak cohesive soil strata has been a challenge for design engineers. Although the design of piles foundation can meet all the design necessities, extensive lengths of piles needed eventually results in vast increase of cost of the overall project. Therefore, it is a necessity that the ground conditions must be improved to allow the buildings and heavy construction. A number of ground improvement techniques have been developed over the past fifty years. Main concern of these techniques includes creating stiff reinforcing elements to the soil mass, which results in a soil that has a higher bearing capacity. Out of the various techniques available for ground improvement, the stone column has been widely used. Stone columns (also known as granular columns, granular piles or sand columns) are used to improve soft ground by increasing the load bearing pressure of the soil and reducing settlement of the foundation of structures, embankments, etc. Although these structures are permissible for a relatively large settlement, it is necessary that the settlement be minimized for maximum safety. There have been several ways for installing stone columns depending on the design, local practice and availability of equipment. Among which, the most general methods are the vibro-replacement method and vibro-displacement or vibro-compaction methods. Vibro-replacement technique of stone column is a process whereby large sized columns of compacted coarse aggregates are installed through the weak soil by means of special in-depth vibrators. This can be carried out either with the dry or wet process. In the dry process, a hole of desired depth is drilled down in to the ground by jetting a vibroflot. Upon extraction of the vibroflot, the borehole must be able to stand open. The densification of the soil will be a result of the vibrator near the bottom of the vibroflot. In the wet process, the vibroflot will form a borehole that is of larger diameter than the vibrator and it requires continuous supply of water. As a result the uncased hole is flushed out and filled with granular soil. Th e main difference between wet and dry process is the absence of continuous jetting water during the initial formation of the borehole in the dry process. The performance of the stone columns is not measurable by simple investigations. However, analytically, the efficiency of this composite system that consists of stone column and soil interactions can be assessed by separate consideration of significant parameters as proposed by Priebe (1995) [1]. Stone column technique has proven successful in improving many applications. Such applications include slope stability of both natural slopes and embankments. Construction of such embankments can commence immediately after the installation of stone columns (Vibro Stone Columns, 2009) [2]. Other advantages include increasing bearing capacity of ground, reducing total and differential settlements, reducing the liquefaction potential of sands. The main disadvantage of the stone column technique is its ability to induce bulging failure on the upper part of the stone column. In-situ field tests (cone penetration test and full scale footing test) before construction and after construction of stone columns have shown significant improvements in the soil (J. T. Blackburn, J. K. Cavey, K. C. Wikar, and M. R. Demcsak., 2010) [3]. In a study of the behaviour of stone columns, (Mitchell J.K., and Huber T.K., 1985) [4], by using finite element analysis, had proved that the installation of stone columns leads to a 30-40% reduction in settlement of the values expected that of an untreated ground. 1.2 Objectives The main objective of this project is to show that the analytical method used to design stone columns and the finite element method used to model the stone column numerically, has comparable total and differential settlement. The analysis also provide the understanding of the influence on settlement by varying parameters such as modulus of deformation of the column to sand ratio (Ec/Es), Area ratio (Ac/A), stress à Ã†â€™0, diameter D, and friction angle of stone column ÃŽÂ ¦c, and finally comparing them against the Priebe analytical approach. The objectives of the project are to: study the existing analytical and numerical theories related to stone column modelling develop an axisymmetric simulation of the stone columns by using finite element method, and compare the settlement difference with the analytical results by altering various parameters related to settlement change. This project uses the finite element software package PLAXIS to simulate the stone column numerically and the design method proposed by Heinz J. Priebe (1995) [1] for the analytical results. 1.3 Organization of the research paper In addition to the abstract, list of figures and notation, acknowledgement, and table of contents, this dissertation is divided to six chapters: The first chapter consists of introduction and background of stone columns where it briefly summarizes the installation methods, some of the advantages and disadvantages of the stone columns. The second chapter describes the study of existing analytical and numerical theories regarding modelling stone columns. In this chapter, other than the main findings from the theories, the full procedure of Priebe (1995) method of modelling stone column has been reviewed. Third chapter describes how the stone column was modelled using the PLAXIS software, including the assumptions made and technical data used in different models. The fourth chapter shows the results obtained from the analysis compared to the analytical method proposed by Priebe (1995). The results are presented using necessary graphs and charts. The fifth chapter includes the conclusion of the project and provides recommendations for further studying. The final chapter lists out the references used in this project. The Appendix contains documents such as the Risk Assessment, Diary of the work progress, and the any additional tables and figures of the analysis. CHAPTER TWO 2. LITERATURE REVIEW Many researchers in this field have made their effortless contribution studying the behaviour of stone columns numerically and analytically. Most of the numerical analyses were conducted using finite element analysis, whereas analytical method is derived from a series of equations. Some of the main findings from researchers related to this study are reviewed below. 2.1 Analytical Models 2.1.1 Alamgir, Miura, Poorooshasb, and Madhav, (1996) Alamgir et al. (1995) proposed a simple theoretical approach to evaluate the deformation behaviour of uniformly loaded ground reinforced by columnar inclusions. The displacements of the soil and stone columns are obtained by considering the elastic deformation of both soil and column. A typical column-reinforced ground and column soil unit (Fig. 2.1) where the column is considered to be cylinder, of height H and diameter of dc (=2a where a is the radius) The deformation at a cross section within the column, wcz, is assumed to be constant throughout whereas the deformation of the surrounding soil, wrz, increases from the soil column surface towards the outer boundary of the unit cell (Fig. 2.2). This denotes that since the column soil interface is elastic and no slip occurs, the displacements of the soil and the column at interface can be assumed to be equal. The deformation of the surrounding ground, wrz, is assumed to follow: where wrz is the displacement of the soil element at a depth z and at a radial distance r, wcz is the displacement of the column element at a depth z, ÃŽÂ ±cz and ÃŽÂ ²c are the displacement parameters, a and b are the radii of column and unit cell, respectively, r is the radial distance measured from the center of the column. The column and the surrounding soil were discretized in to a number of elements as shown in Fig. 2.3. The interaction shear stresses and stresses on the column and the soil were obtained by using equilibrium of vertical forces within the medium (Fig. 2.4). Successively the displacement of the column and soil were obtained by solving equations by applying the linear deformation characteristics of the soil. Therefore, the deformation of the jth element of the column, Wcj was obtained as: where à ¢Ã‹â€ Ã¢â‚¬  H is the height of a single element, Es and Ec are the modulus of deformations of soil and column material respectively, vs is the Poissons ratio of the soil, and à Ã†â€™cj is the normal stress acting at the top of the jth element of the column. Due to the symmetry of load and geometry, the shear stress at the outside boundary of the unit cell is zero, which subsequently leads to an equation for ÃŽÂ ²c Furthermore, the compression of the soil element adjacent to the boundary of unit cell (N,jth element of the soil), wsNj was derived as: where à Ã†â€™sNj is the normal stress acting at the top of the element, n is the spacing ratio b/a, à ¢Ã‹â€ Ã¢â‚¬  R is à ¢Ã‹â€ Ã¢â‚¬  r/a and à ¢Ã‹â€ Ã¢â‚¬  r is (b-a)/n. By using the displacement compatibility and substituting r/a=n-à ¢Ã‹â€ Ã¢â‚¬  R/2, Eq. [2.1] can be written as: Finally, solving the equations 2.2, 2.3, 2.4, and 2.5 can lead to the displacement parameter The settlement profiles, the shear stress distribution, and the load sharing from the above mention method was compared against a simple finite element analysis as shown in Fig. 2.5, Fig. 2.6, and Fig. 2.7. It is seen that the results obtained shows a reasonable agreement between the two methods and can be used as a useful method to determine the settlement of the stone columns. 2.1.2 Priebe (1995) Priebe (1995) proposed a design method to assess the behaviour of stone columns that uses an improvement factor which stone columns improve the performance of the subsoil in comparisons to the state without columns. The above statement was best described using the following relationship: According to this improvement factor, the deformation modulus of the composite system is increased respectively settlements are reduced. A unit cell of area A is considered which consists of a single column with the cross section area Ac. Calculation of the improvement factor was done by assuming that: The stone column to be of incompressible material The stone column is installed within a rigid layer The bulk densities of the stone column and soil are also neglected. Hence, according to Priebes approach, column cannot fail in end bearing and any settlement of the load area results in a bulging of the column, which remains constant all over its length. The improvement of a soil achieved by the presence of stone columns is evaluated based on the assumption that the column material shears from the beginning whilst the surrounding soil reacts elastically. Additionally, the coefficient of earth pressure amounts to K=1 by assuming that the soil to be displaced already during the column installation to such a degree that its preliminary resistance corresponds to the liquid state. Using the above criterion the basic improvement factor n0 is expressed as: where = Improvement factor Ac = Area of the stone column A = Grid area of the single unit = Poissons ratio = Coefficient of active earth pressure for the stone column material = Friction angle of the stone column material Since a Poissons ratio of 1/3 is adequate for the state of final settlement in most cases, the results of the evaluation is expressed as basic improvement factor n0 and substituting 1/3 as Poissons ratio, which leads to the following equation. The relation between the improvement factor n0, the area ratio A/Ac and the friction angle of the backfill material is illustrated in figure 2.8 below. The compacted backfill material of the stone column is still compressible. Due to this reason, applied load of any amount will lead to settlements that are unconnected with bulging of the columns. Subsequently, compressibility of the column is integrated by adding up an additional area ratio (A/Ac) as a function of the constrained moduli of the columns and soil Dc/Ds and is provided in the Fig. 2.9. The improvement factor as a result of the consideration of the column compressibility is represented by n1, as shown in the equation: where and Furthermore, for =1/3 can be found using the equation below The additional loads due to the bulk densities of the soil and columns decrease the pressure difference asymptotically and reduce the bulging correspondingly. Subsequently, multiplying the basic improvement factor by a depth factor could incorporate the effect of the bulk density, which is given by: where, fd = Depth factor K0C = Coefficient of earth pressure at rest for stone column material = Bulk density of the soil = Layer thickness Pc = Pressure within the column along the depth Figure 2.10 shows the influence factor y as a function of the Area ratio A/Ac and can be used to approximate the depth factor. The figure considers the same bulk density for the columns and soil, which may not be true in most cases. Therefore as a safety measure, the lower value of the soil should be always considered. Using the above depth factor fd, a more enhanced improvement factor can be defined that considers the effects of the overburden pressure, and therefore is represented by n2 where it can be related by the following equation: The depth factor is limited so that the settlement of the columns resulting from their inherent compressibility does not exceed the settlement of the composite system. This is because as the depth increases, the support by the soil reaches such an extent that the column do not bulge anymore. The first compatibility control where the depth factor is limited is applied when the existing soil is stiff or dense and is given by: The second compatibility control is required since should not be considered even if it may result from the calculation. This second control relates to the maximum value of the improvement factor nmax and is applied when the existing soil is loose or soft. Both compatibility controls can be determined using figure 2.11 below. Finally, the total settlement of a single or a strip footing can be assessed using the above series of equations. The design results from the performance of an unlimited column grid below an unlimited load area. For the unimproved ground, the settlement can be found using the equation: where, sà ¢Ã‹â€ Ã… ¾ = Total settlement p = Pressure exerted by the above structure d = Depth of the stone column Ds = Constrained modulus of the soil Similarly, the total settlement of the improved ground, where the improvement factor is incorporated, can be found by dividing the settlement by n2, which is shown below: This method is one of the most common and well-known method of designing stone columns and has been widely used all over the world because of its simplicity. Moreover, in comparison with the other methods, it shows a much wider behaviour of the stone column by assuming the stone column and surrounding soil as a composite system. 2.2 Numerical Models 2.2.1 A.P. Ambily and Shailesh R. Gandhi (2007) Ambily and Shailesh (2007) studied the behaviour of stone columns by comparing experimental and Finite Element analysis on a single stone column and a group of 7 columns. Laboratory experiments were carried out on a stone column of 100mm diameter surrounded by soft clay in cylindrical tanks of 500mm high with diameter varying from 210 to 420 mm for a single column test and from 210 835 mm for a group of 7 columns. This represents the required unit cell area of soft clay around each stone column. Pressure cells attached to the loading plate were used to measure the stress intensity of the column and the soil as shown in figures 2.12 and 2.13. Furthermore, it is also assumed the stone columns are installed in a triangular pattern. The load deformation behaviour of the column/treated soil was studied by applying vertical load for both cases; column only loading and entire area loading, and observed for equal intervals of settlements until failure occurs. After a series of procedure, the shapes of the tested columns are obtained. It is clearly seen in Fig. 2.14 that bulging mode of failure only occurs in the case of column alone loaded, and not in the case of entire area loaded. Finite Element analysis was conducted using 15-noded triangular elements with the software package PLAXIS, to compare the load-settlement behaviour with the model test and the laboratory experiment. The analysis was carried out using a stone column of diameter 25 mm and 225 mm high, which was made at the center of the clay bed and loaded with a plate of diameter two times the diameter of the stone column. The axisymmetric finite element mesh to represent the single stone column and the group of stone columns are shown in Fig. 2.15 and Fig. 2.16 respectively. Likewise the laboratory experiment, finite element analyses were done for column alone loaded and entire area loaded case for s/d=3. The results of these simulations (Fig. 2.17) shows that failure by bulging occurs in column alone loaded case, which also agrees with the results from laboratory experiment. The comparison of the experimental results and finite element analysis data shows significant consistency in both methods. The comparisons made by A.P. Ambily and Shailesh R. Gandhi include the effect of shear strength, Cu (Fig. 2.18) and the effect of s/d (Fig. 2.19) on the behaviour of stone columns. Additionally, the effect of surcharge on stress settlement behaviour (Fig. 2.20) and effect of s/d and ÃŽÂ ¦ on the stiffness improvement factor (Fig. 2.21) was compared between both methods. These tests have also shown similar behaviour. The stiffness improvement factor (ÃŽÂ ²) was calculated as the ratio of the stiffness of treated and untreated ground, and beyond s/d = 3, it shows no significant improvement. The analysis was extended to study the effect of the angle of internal friction of stones by varying the ÃŽÂ ¦ as 35, 40, 43, and 45o for varying values of s/d ranging from 1.5 4. From the results shown in Fig. 2.22, it is confirmed that this relationship is valid for any shear strength values of surrounding soil. Furthermore, the comparisons between a single column and group of 7 columns were found as in Fig. 2.23. Both experimental and finite element method results reveal comparable behaviour regarding the ultimate load and load deformation relationship. To ensure that this proposed design method agrees with the existing theories, this study was compared with the existing theories as shown in Fig. 2.24 and Fig. 2.25. The result shows a slightly higher stiffness improvement factor (ÃŽÂ ²) for an area ratio more than 4 and a lower value for an area ratio less than 4 compared to Priebe (1995). 2.3 Summary The studies mentioned above show comparable results and have been adopted by many engineers and contractors. However, not many researchers had compared Priebes analytical model with finite element method. Therefore, the finite element analysis carried out in this project will be compared to the design method proposed by Priebe (1995), since it gives a much broader overview of the composite system consisting of the stone column and soil interactions and moreover it is the most common and improved analytical method used by the design engineers around the globe. CHAPTER THREE 3. METHODOLOGY 3.1 Introduction Different methods of modelling stone columns numerically have been implemented in the past. Among those, the most simplest and common type of numerical modelling is using finite element method. In fact, studies have shown that the settlements predicted from the finite element analysis shows comparable results that of the values gained from actual field tests (Kirsch, F. 2009). Numerical calculations are usually complex and most of the time is impossible to conduct without means of dedicated software. Likewise, in this research project, PLAXIS software is used to carry out the finite element analyses. 3.2 PLAXIS software The main computer software used in this investigative project is PLAXIS Professional Version 8.2. PLAXIS is a comprehensive package for finite element analyses for geotechnical applications. It allows simulating the soil behaviour by using soil models. The software employs a graphical user interface that makes it simple to use and also provide the ability to input the necessary parameters such as different soil layers, structural elements, variety of loadings, and boundary conditions through CAD drawing procedures. It allows discretizing the soil component into either 6-noded or 15-noded triangular elements whereby 15-noded triangles provides high stress results for complex problems. The software also allows automatic generation of 2D finite element meshes that can be further refined according to the choice of analysis. In addition to that, the software comes with a very useful feature named Staged Construction. This feature allows the models to be simulated at different stages by ac tivating and deactivating clusters of elements, application of loads, etc. One of the advantages of this software is the ability to generate the results quickly with minimum errors. The output results include values for stresses, strains, settlements, and structural forces together with the plots of different curves such as, load-displacement curve, stress-strain diagrams, and time-settlement curve. 3.3 Finite Element Modelling Finite element analysis was conducted to compare the load-settlement behaviour of the stone column. A two dimensional axisymmetric analysis was carried out since the investigation concerns a single unit of stone column using Mohr-Coulombs criterion for clay and stone column. 15-noded discretization was used for more precise results. The initial vertical stress due to gravity has been considered in this analysis. Similarly, the stress due to column installation, which often depends on the method of construction, is also considered in this analysis. Assumptions made in the finite element modelling: The soil is assumed to be homogenous, infinite and behaves as Mohr-Coulomb model. The ground water table is at the same level as the stone column and clay layer, meaning the stone column and clay layer is submerged in the water. Hence, effect of ground water condition should be taken into account. The base of the clay layer is rigid, i.e., full fixity at the base of the geometry (ux=0, uy=0) and roller conditions at the vertical sides (ux=0, uy=free) boundary conditions are shown in Figure 3.1(a). Assumed that deformation of the column is mainly by radial bulging and no significant shear is possible. Therefore, interface element between stone column and clay has not been used. Mitchell, J. K., and Huber, T. R. (1985) also carried out similar type of finite element analysis without the inclusion of the interface element. 3.4 Geometrical Parameters The dimensions of the PLAXIS model are shown in Figure 3.1(b). H is the height of the column, which varies between 10m, 20m, and 30m. D is the diameter of the stone column, which has a typical value of 1m, in all the models except for the model to check the influence of diameter and spacing. Equivalent diameter De depends on the spacing between stone columns as well as the arrangement pattern of the columns. The value of De was calculated by considering the following Influence Area methods. 3.4.1 Influence Area Methods There are several methods for calculating the equivalent diameter around the stone column, which depends greatly on the spacing, diameter, and pattern of installation of the stone column. Two methods were considered in this investigation. 3.4.1.1 Equivalent Area method The equivalent area method simply equates the area of the grid spacing with that of the cross sectional area of column to find the influence area around the stone column. The following example gives a better understanding of the above statement. Example: Grid spacing of the column = 1.5 X 1.5 meters (square grid) Therefore, Diameter of stone column = Finally, Where, De is the equivalent diameter around the stone column. 3.4.1.2 Unit cell method (Balaam Booker, 1981) Unit cell consists of the column and the surrounding soil within the zone of influence of the column. The unit cell has the same area as the actual domain and its perimeter is shear free and undergoes no lateral displacement. Balaam Booker (1981) relates the diameter of the unit cell to the spacing of the columns as: where, De is the equivalent diameter (for square grid) S is the spacing of the stone column Similarly the different geometrical patterns due to column arrangements are shown in the Figure 3.2. Both methods reviewed above gives relatively similar magnitudes. However, Priebes analytical method concerns more on unit cell area. Hence, for this investigation Equivalent Area method is used to model the influence are in PLAXIS. 3.5 Mesh Refinement Test Mesh generation has a great influence in the accuracy of the model. Generally, the finer the mesh the more accurate the result would be. However, this is not true for every case. Therefore a simple test using PLAXIS was conducted to check the effect of mesh refinement. Initially, mesh generation was set to coarse (around 100 elements), utilized as global coarseness of model. The test was carried out by comparing it with the refined mesh (around 500 elements). Moreover, the mesh is further refined which in PLAXIS is set to very fined (around 1000 elements). The generated meshes are shown in Figure 3.3. followed by the time-displacement graph showing the comparison between coarse, medium, fine and very fine mesh refinements. (Figure 3.4) From the above graph it can be seen that the four curves gives comparable results. However, the coarse, medium, and fine meshes give very similar results compared to the very fine mesh refinement. The objective here was to get the lowest value for the displacement since the improved ground due to the installation of stone column would eventually lead to a reduced settlement. Therefore, the finest mesh refinement gives the most precise result. Even though it takes a substantial amount of time to simulate using the most finest meshing, for this investigation, models had been simulated using the very fine mesh option. 3.6 Input Parameters Varying the soil parameters can alter soil characteristics. Most important outcome by altering these parameters is deformation that leads to settlement. Such parameters that have major impact on settlement includes, material type, spacing of stone columns, diameter of influence area, diameter of stone column, elastic modulus of both column and soil, depth of the soil layer, Poissons ratio for both column material and soil, Unit weights of the materials, cohesion, friction angle, etc. Soil and material properties are shown in Table 3.1. Note that the effective stress cohesion, c of the stone column is given a small nonzero value to avoid numerical complications. The majority of the above parameters are considered for only one type of test model and are varied for different model tests. The varied parameters such as elastic modulus of soil and column, friction angle, spacing between columns and influence area around the stone column are reviewed in the following section. 3.7 Test Models The main objective of this project is comparing both analytical and numerical method using Priebes analytical approach and finite element analysis as numerical solution. This can only be achieved by developing multiple models and simulations to obtain a range of values to compare with, which would lead to a more solid conclusion. Three constitutive models were considered for the representation of the following three cases. A clay layer of 30 m, which has a stone column of height 10 m installed. A clay layer of 30 m, which has a stone column of height 20 m installed. A clay layer of 30 m, which has a stone column of height 30 m installed. Note that 1 and 2 are floating columns that are not extended to bedrock or hard layer, which in stone column installation is a rare case, yet installed occasionally. Each of the above tests was carried out by varying the spacing between columns, which would alter the s/d relationship together with the Ac/A ratio. Further tests were carried out to check the influence of stress à Ã†â€™0, diameter D, modulus of deformation of the column to sand ratio Ec/Es and friction angle of stone column ÃŽÂ ¦c using the third case and compared them against the Priebe analytical approach. The summary of test models is given in the Tables 3.2. All the tests were carried out in 3 stages. Install the stone column: Just after the stone column is installed Apply Load: Just after the load is applied to the column Consolidation: After the consolidation process completed to a minimum pore pressure of 1kPa In the all cases the materials were idealized as the Mohr-Coulomb model with the characteristic linear-elastic-perfectly plastic behaviour and the failure criteria defined by the strength parameters given in tables below. Table 3.2 Summary of Model tests Model Test Description Constants Variables 1 Influence of column height on settlement (case 1, 2, and 3) à Ã†â€™0 = 100 kPa Ac/A = 0.2 ÃŽÂ ¦c = 40o Ec/Es = 20 Heigh

Anti Social Disorder Essay -- essays research papers fc

Anti-Social Personality Disorder In a world full of fears, perhaps the worst one a human being should have is that to be afraid of his fellow man. The human that should be most feared is the one that has Anti-Social Personality Disorder or in laymen's terms the psychopath. The psychopath is probably the most deviant mind that exists and treatment is not very successful because there is not a cure or drug to control it. The solution in my mind to control the problem of sociopaths is to let them live in colonies with each other. Through my research I will develop an understanding of this personality disorder and convince you the reader that my solution might be a viable solution. The sociopath is a combination of other mental illnesses that are incurred in childhood as a result of heredity, trauma and the lack of emotional development. The lack of moral or emotional development which gives a sociopath a lack of understanding for other people's feelings which enables them to be deceitful without feeling bad about whatever they do. The under developed emotional system as explained in the video "The World of Personality Disorders volume 5" says the sociopath is "emotionally retarded" . The sociopathic behavior problems that start as a child have links to heredity, a family with a pre-disposition to perform crimes, alcoholic parents that do crimes, irresponsible behavior that persists and parents that do not discipline. The child that will eventually be a sociopath exhibits certain feeling inside that they are inadequate, shamed and because of that they are teased and made fun of. The child characteristics of a future sociopath consist of being incapable of following the rules. The youngster will skip school, bully, steal, torment animals, run away from home and the child is likely to develop Attention Deficit \Hyperactivity Disorder or AD|HD. At an earlier age than their peer group the child will smoke drink, do drugs, and become sexually active. The diagnoses of Anti-Social Personality Disorder is not used for people under the age of 18. The Psychopath is defined in the dictionary as a person suffering from, especially a severe mental disorder with aggressive antisocial behavior which is a nice way of saying a really bad and mean person. There are many characteristics of a sociopath and each sociopath has thei... ... if they were caused to interact with fellow sociopaths it would keep them interested because it is not as easy to manipulate or con. The possibility of violence in my colony is great but the sociopaths would not mind because it is in their personality and it would serve us better if they killed or hurt each other rather than us. In closing the sociopath is so hard to deal with we should make strides to control their behavior in public. --- Bibliography BOOKS Wing, John Kenneth, Reasoning About Madness, Oxford Press, Oxford 1978 Milt, Harry ,Basic Handbook on Mental Ilness,Scribner, New York, 1974 Hales, Dianne, Caring for the Mind, Bantam Books, New York, 1995 ARTICLES Salama M.D., Aziz A., The Antisocial Personality, The Psychiatric Journal of the University of Ottawa, Ottawa, 1988 Malaney M. D. , Kathleen R., Patients with Antisocial Personality Disorder, Post Graduate Medicine, 1992 Unknown, unknown, Psychopathic Patients Pose Dilemma For Physicians and Society, CMAJ, 1995 Hare Ph.D., Robert,Predators, Psycology Today, Feb. 1994 Hill, Heather,Monsters In Our Midst,Homemaker's Magazine, Oct. 1995 VIDEO The World of Abnormal Psychology Personality Disorder

What impression of the Miller does Chaucer create in the portrait? Essa

What impression of the Miller does Chaucer create in the portrait? Extracted from the general prologue, the portrait of the Miller begins by explaining his physical appearance. His physique is said to be ’ful big of brawn and eek of bones’ indicating he was stocky, big boned and had large muscles. He was also ‘short-sholdred’ meaning broad. This suggests he could be quite threatening to look at. The Miller had a red beard as wide as a spade, a hairy wart on the top right of his nose, wide black nostrils and a huge mouth as great as a furnace. Chaucer creates a very clear image in our minds of the Miller and the impression given through his physical description suggests he is rather ugly. In the period of the 14th Century when Chaucer wrote the Canterbury tales, it was considered that you could tell a persons character from their appearance, be it good or bad. Chaucer portrays the Miller as physically repulsive which implies he is an immoral and bad character. His image could reflect his personality. In the case of the miller this is so. It is explained that the Miller participated in a popular sport of the time, wrestling. It is further explained that he always won the ram (the prize given). Chaucer continues to give the impression that the Miller was strong and to a certain extent should be feared. It also says that he carried with him a ‘swerd and bokeler’ (sword and shield) by his side, further suggesting he was always fighting. In mirroring his bad physical appearance, there is a suggestion that the Miller could have been a thief. ‘Ther was no dore that he nolde heve of harre’ says that there was no door he would not have off its hinges. This implies that the Miller wondered the town banging down d... ...he Miller as the devil to represent that he really was an evil character is only some peoples perception. Others interpret this reference to have a comic element and to be used for the purpose of taking-the-mick. In the 14th Century the general opinion of the Miller was low and he was a disliked man. This was because it was known that he over-priced for his skills and ripped off his customers by taking too much of their grain as a charge. It is therefore some peoples belief that Chaucer is simply comparing the Miller to the devil as a joke and to amuse those who disliked the man to simply make the book popular. Whether Chaucer meant to make this reference as comical or to suggest the Miller was the devil incarnate, the same impression is given. In the portrait of the Miller Chaucer gives the impression that he is ugly, loud, rough and of an evil manner.

Cause and Effect Essay

Internet technology has created a hindrance in people’s lives. First the use of technology creates nothing but a distraction. In the article â€Å"Is Technology Making Us intimate Strangers? †, Jonathan Coleman says , â€Å" If someone hasn’t left us a phone message or fax, there is always the chance that an e-mail awaits. I can’t even finish this essay without checking- three times already- to see if another one came through. † This is completely true, in the tome it took me to quote that, I stopped and checked my phone twice. Another example of technology being a distraction is by talking on the phone or checking a text message which can be a distraction as well as deadly. Secondly how the use of technology enables people to have privacy. It’s crazy how jobs, schools or anyone that wants to know anything about a person can easily find out through the use of internet technology. Example of that is through a social network. If someone wants to know where a person lives, where they go to school, or what they are doing, they could find out with the touch of a finger, stripping people from any sort of privacy. Finally social interaction, Jonathan Coleman states â€Å"Technology, for the most part, creates the illusion of intimacy. As marvelous as it can be, it also foils us. It keeps us from the best of ourselves and enables us to avoid others. It makes us into intimate strangers. † A prime example of that is the use of internet dating, technology takes away the term dating, getting out knowing somebody, to have a face to face conversation. Instead we stay indoors with our computers or any sort of technology talking to our computer loves.

Pride And Prejudice Diary Entry

Dear Diary, Little did I know about Mr.Bingley and Mr.Darcy. I heard some good things about them but nothing really relevant. But it was my time to find out everything I needed to know about them at a small dinner party that someone organised. It doesn't matter how the party will be, I want to know who is going to be there, and most importantly, what will happen. I spent the whole day shopping for my dress, and some accessories. I bought a diamond necklace and I was ready to gossip about the new gentleman's in town. I enter the dinner without socialising to much, I didn't want to get distracted, I was keeping my prize. I saw one of the two dancing, how did I know it was them? Every single one of my friend was ‘spying' on those two guys. It must have been them. I get closer and closer and I just can't avoid to notice how one of the two looks so arrogant and bored. His face had no emotion, the little emotion he portrayed was negative. He was bored and wasn't even dancing. However, the other one had an endless smile on his face and he was undeniably having fun like a real gentleman. I go there and find out that the boring, arrogant looking one was Mr.Darcy. So obviously the other one was Mr.Bingley who was flirting with a girl. I couldn't be bothered to even look at the girl because I was so distracted from this amazingly fascinating man. Mr.Bingley stops dancing for a while and speaks to Mr.Darcy but I'm not near enough to listen to what they are saying. I see Mr.Darcy pointing at Lizzy and, Lizzy offended. Her eyes were full of tears. What did he say? Why did she cry? â€Å"She is tolerant; but not handsome enough to tempt me†. These are the words Mr.Darcy said about Lizzy. No wonder she got offended. His character was decided, he is an arrogant and exuberant person. I stop concentrating on Mr Darcy because he is too boring for me, I need some interesting things. Some gossip. I run to my girlfriends and they immediately point at Mr.Bingley. Yes, I knew he was dancing with a girl, but I looked at his eyes and I was shocked. His eyes fell in love. No wonder he had a huge smile on his face, he fell in love with Lydia. Meanwhile I notice that Mr.Bennet announces that he had already met Mr.Bingley. He didn't tell the wife or the daughters. Why? Well I don't really care. He probably did it to contradict his family. He is a nice man but he is always playing jokes and tricks on everyone. Especially the wife. I can't believe these two individuals are married, they are like day and night, two complete different things. I see the two of them discussing about inviting Mr.Bingley to dinner. The night was over. What will Happen Next? Only I know! And who am I? That's a secret I'll never tell, the only one.

Genetically Modified Food Essay

â€Å"Mommy,† a five year-old child states, â€Å"this food is tastier than the other kind. † The reason for this is simple; genetic engineering. Genetic engineering is modification of a plant’s or animal’s DNA. Scientists do this to enhance a certain gene within the organism. Some opponents of genetically modified food argue that growing this kind of food will ruin the environment and the ecosystem permanently. In fact, genetically modified food is beneficial for the environment and for society. With the creation and use of genetically modified food, the world shall change forever. To begin with, GM (genetically modified) crops are able to be used for medical purposes. Meaning, these modified plants â€Å"have medical benefits that prevent cancer and other diseases† (Institute 32). Medically, this is extremely important because thousands of people have died to cancer. The world would be a better place without cancer. Not only does this help people, a plant can be made to produce more nutrients that are essential (Manning 10). A persons immune system can be boosted to help fight off viruses and other bad organisms. Sadly, â€Å"800 million people around the world are undernourished† (Pence 58), causing diseases to run rampant. In the medical world, rampant diseases can cause harm to millions of people. Not only this but 400 million child bearing women have iron deficiency and 100 million children suffer from blindness from Vitamin A deficiency (Penning 58). This is unfortunate in all aspects. People do not deserve to die due to spoiled or a shortage of food. GM food can help people. Without a doubt, medical usage of GM food is essential. Another piece of evidence that shows GM crops in their finest is their tactics in feeding the world. One conclusion can be drawn from the fact that â€Å"GMOs [Genetically Modified Organisms] provide healthier food for [farmer’s] farm animals]† (Institute 32). The healthier an animal eats, the better the animal is to consume. The meat and milk from animals will have more nutrients. Not only this, the government backs up GMOs and says these can feed millions of people in third world countries (Manning 10). People that are living in poverty can be fed and not die due to unsuitable conditions. Once again, people do not deserve to parish due to starvation. Mr. Pence states that â€Å"GM crops are the tools for feeding the world† (59). For this world feeding tactic, he states the truth; better crops and better animals will make food last longer or have bigger quantities to share with the world. This means that countries like Brazil can change. Brazil is able to challenge the â€Å"big five† food exporters of the world (â€Å"How† 11). The fact is clear the genetically modified foods can feed the world. Additional proof that GM foods are beneficial to the people of the world is their environmental benefits. Mr. Pollan shares his thoughts by saying that â€Å"biotechnology is the replacement of expensive and toxic chemicals† (15). What he means is that the environment will not need to endure through as much of the harmful chemicals that farmers have to use to eradicate insects. This leads to the point that â€Å"farmers has not to spray anything, has not to dust anything† (Manning 68) and does not need to destroy the environment. This can give the soil a break from the plagues that are herbicide and insecticide. Not only is the soil being saved, natural land marks can be saved. For example, the forests of the Amazon are being deforested for land. However, with the help of GMOs, Brazil can use the plains and farmland they have better (â€Å"How† 2). Forests can then be saved because countries like Brazil can then use the entire land plot for what it is worth and more. As the evidence clearly shows, genetically modified organisms can benefit the environment. Finally, the most important piece of evidence that genetically modified foods are beneficial for humanity is its effect on crops as a whole. To begin with, plants have improved nutrition (Institute 31). For people who want to lose weight, this is a plus. The reason of this is that the person can eat less and still feel healthy. Not only this, the â€Å"[use of] biotechnology can make a crop more resistant to pests, herbicides, or disease† (Manning 10). A pest can be defined as a grasshopper, beetle, locust, and other animals that consume farm crops. Hundreds of crops can now be saved due the natural insecticide (instrument for killing insects). Not only this, unwanted plants, such as weeds, can be killed without the crop being affected. A natural herbicide resistance can cut down on the amount needed by farmers to kill a plant. Finally, disease resistant plants are very important. The Great Potato Famine of 1840 showed what one disease can do. If a disease like that struck a major crop field, millions of people could starve. This absolutely proves the importance of GMOs. Shockingly, as stated, countries like Brazil can go from â€Å"zero to hero† with benefits from GMOs (â€Å"How† 11). If the entire world could be like this, world hunger could end. Only one conclusion can be drawn; genetically modified crops are extremely beneficial to the world. Overall, the world as we know it is being affected by biotechnology. This is an extremely good thing! With society being able to prosper, the world can become a better place. Learning about GM food in a community can help support biotechnology and all of its benefits. This can be an important decision. If the world shall change, why not change for everyone’s benefit.

Edwin Arlington Robinson

â€Å"One of the most prolific major American poets of the twentieth century, Edwin Arlington Robinson is, ironically, best remembered for only a handful of short poems,† stated Robert Gilbert in the Concise Dictionary of American Literary Biography. Fellow writer Amy Lowell declared in the New York Times Book Review, â€Å"Edwin Arlington Robinson is poetry. I can think of no other living writer who has so consistently dedicated his life to his work.† Robinson is considered unique among American poets of his time for his devotion to his art; he published virtually nothing during his long career except poetry. The expense of Robinson’s single-mindedness,† Gilbert explained, â€Å"was virtually everything else in life for which people strive, but it eventually won for him both fortune and fame, as well as a firm position in literary history as America’s first important poet of the twentieth century. † Robinson seemed destined for a career in business or the sciences. He was the third son of a wealthy New England merchant, a man who had little use for the fine arts. He was, however, encouraged in his poetic pursuits by a neighbor and wrote copiously, experimenting with verse translations from Greek and Latin poets. In 1891 Edward Robinson provided the funds to send his son to Harvard partly because the aspiring writer required medical treatment that could best be performed in Boston. There Robinson published some poems in local newspapers and magazines and, as he later explained in a biographical piece published in Colophon, collected a pile of rejection slips â€Å"that must have been one of the largest and most comprehensive in literary history. † Finally he decided to publish his poems himself, and contracted with Riverside, a vanity press, to produce The Torrent and The Night Before, named after the first and last poems in the collection. In the poems of The Torrent and The Night Before, Robinson experimented with elaborate poetic forms and explored themes that would characterize much of his work—†themes of personal failure, artistic endeavor, materialism, and the inevitability of change,† according to Gilbert. He also established a style recognizably his own: an adherence to traditional forms at a time when most poets were experimenting with the genre (â€Å"All his life Robinson strenuously objected to free verse,† Gilbert remarked, â€Å"replying once when asked if he wrote it, ‘No, I write badly enough as it is. †), and laconic, everyday speech. Robinson mailed copies of The Torrent and The Night Before out â€Å"to editors of journals and to writers who he thought might be sympathetic to his work,† said Gilbert. Read also  How Powerful Do You Find Atticus Finch’s Closing Speech? The response was generally favorable, although perhaps the most significant review came from Harry Thurston Peck, who commented unfavorably in the Bookman on Robinson’s bleak outlook and sense of humor. Peck found Robinson’s tone too grim for his tastes, saying that â€Å"the world is not beautiful to [Robinson], but a prison-house. â€Å"I am sorry that I have painted myself in such lugubrious colours,† Robinson wrote in the next issue of the Bookman, responding to this criticism. â€Å"The world is not a prison house, but a kind of spiritual kindergarten, where millions of bewildered infants are trying to spell God with the wrong blocks. † Encouraged by the largely positive critical reaction, Robinson quickly produced a second manuscript, The Children of the Night, which was also published by a vanity press, a friend providing the necessary funds. Unfortunately, reviewers largely ignored it; Gilbert suggests that they were put off by the vanity imprint. In 1902, two friends persuaded the publisher Houghton Mifflin to publish Captain Craig, another book of Robinson’s verse, by promising to subsidize part of the publishing costs. Captain Craigwas neither a popular nor a critical success, and for several years Robinson neglected poetry, drifting from job to job in New York City and the Northeast. He took to drinking heavily, and for a time it seemed that he would, as Gilbert put it, fall â€Å"into permanent dissolution, as both his brothers had done. † â€Å"His whimsical ‘Miniver Cheevy,’† Gilbert continued, â€Å"the poem about the malcontent modern who yearned for the past glories of the chivalric age and who finally ‘coughed, and called it fate/and kept on drinking,’ is presumably a comic self-portrait. † Robinson’s luck changed in 1904, when Kermit Roosevelt brought The Children of the Night to the attention of his father, President Theodore Roosevelt. Roosevelt not only persuaded Random House to republish the book, but also reviewed it himself for the Outlook (â€Å"I am not sure I understand ‘Luke Havergal,’† he said, â€Å"but I am entirely sure that I like it†), and obtained a sinecure for its author at the New York Customs House—a post Robinson held until 1909. The two thousand dollar annual stipend that went with the post provided Robinson with financial security. In 1910, he repaid his debt to Roosevelt in The Town down the River, a collection of poems dedicated to the former president. Perhaps the best known of Robinson’s poems are those now called the Tilbury Town cycle, named after the small town â€Å"that provides the setting for many of his poems and explicitly links him and his poetry with small-town New England, the repressive, utilitarian social climate customarily designated as the Puritan ethic,† explained W. R. Robinson in Edwin Arlington Robinson: A Poetry of the Act. These poems also expound some of Robinson’s most characteristic themes: â€Å"his curiosity,† as Gerald DeWitt Sanders and his fellow editors put it in Chief Modern Poets of Britain and America, â€Å"about what lies behind the social mask of character, and †¦ is dark hints about sexuality, loyalty, and man’s terrible will to defeat himself. † Tilbury Town is first mentioned in â€Å"John Evereldown,† a ballad collected in The Torrent and The Night Before. John Evereldown, out late at night, is called back to the house by his wife, who is wondering why he wants to walk the long cold miles into town. He responds, â€Å"God knows if I pray to be done with it all/But God’s no friend of John Evereldown. /So the clouds may come and the rain may fall,/the shadows may creep and the dead men crawl,—/But I follow the women wherever they call,/And that’s why I’m going to Tilbury Town. Tilbury Town reappears at intervals throughout Robinson’s work. The title poem in Captain Craig concerns an old resident of the town whose life, believed wasted by his neighbors, proves to have been of value. The Children of the Night contains the story of Richard Cory, â€Å"a gentleman from sole to crown,/Clean favored, and imperially slim,† who â€Å"one calm summer night,/Went home and put a bullet through his head,† and Tilbury Town itself is personified in the lines â€Å"In fine, we thought that he was everything/ To make us wish that we were in his place. The Man against the Sky—according to Gilbert, Robinson’s â€Å"most important single volume,† and probably his most critically acclaimed—includes the story of the man â€Å"Flammonde,† one of the poet’s most anthologized Tilbury verses. Despite the fact that much of Robinson’s verse dealt with failed lives, several critics see his work as life-affirming. May Sinclair, writing an early review of Captain Craig for the Fortnightly Review, said of the Captain, â€Å"He, ragged, old, and starved, challenges his friends to have courage and to rejoice in the sun. Amy Lowell, in her Tendencies in Modern American Poetry, stated, â€Å"I have spoken of Mr. Robinson’s ‘unconscious cynicism. ’ It is unconscious because he never dwells upon it as such, never delights in it, nor wraps it comfortably about him. It is hardly more than the reverse of the shield of pain, and in his later work, it gives place to a great, pitying tenderness. ‘Success through Failure,’ that is the motto on the other side of his banner of ‘Courage. † And Robert Frost, in his introduction to Robinson’s King Jasper, declared, â€Å"His theme was unhappiness itself, but his skill was as happy as it was playful. There is that comforting thought for those who suffered to see him suffer. † Many Tilbury Town verses were among the poems Robinson included in his Pulitzer Prize-winning Collected Poems of 1922—the first Pulitzer ever awarded for poetry. He won his second poetry Pulitzer in 1924, this time for The Man W ho Died Twice, the story of a street musician whose one musical masterpiece is lost when he collapses after a night of debauchery. Gilbert attributed the poem’s success to its â€Å"combination of down-to-earth diction, classical allusion, and understated humor. † In 1927, Robinson again won a Pulitzer for his long narrative poem Tristram, one in a series of poems based on Arthurian legends. Tristram proved to be Robinson’s only true popular success—it was that rarity of twentieth-century literature, a best-selling book-length poem—and it received critical acclaim as well. â€Å"It may be said not only that ‘Tristram’ is the finest of Mr. Robinson’s narrative poems,† wrote Lloyd Morris in the Nation, â€Å"but that it is among he very few fine modern narrative poems in English. † Early in 1935, Robinson fell ill with cancer. He stayed hospitalized until his death, correcting galley proofs of his last poem, King Jasper only hours before slipping into a final coma. â€Å"Magazines and newspapers throughout the country took elaborate notice of Robinson’s death,† declared Gilbert, â€Å"reminding their readers that he had been considered America’s foremost poet for nearly twenty years and praising his industry, integrity, and devotion to his art. â€Å"It may come to the notice of our posterity (and then again it may not),† wrote Robert Frost in his introduction to King Jasper, â€Å"that this, our age, ran wild in the quest of new ways to be new†¦. Robinson stayed content with the old-fashioned ways to be new. † â€Å"Robinson has gone to his place in American literature and left his human place among us vacant,† Frost concluded. â€Å"We mourn, but with the qualification that, after all, his life was a revel in the felicities of language. †